High Pressure Process Compressor Turbine System with Wide Flow
Range
Description
GooDSeaA provides 1-6 stage special process compressor customized for clients to achieve high pressure and wider flow range gas
supply.
The impeller of centrifugal type series products is precisely
designed with advanced computer simulation technology, and the
impeller is made of aviation grade materials through overall
milling, the impeller has the characteristics of high strength,
light weight, low vibration while running after high speed dynamic
balance testing. Its excellent aerodynamic performance ensures that
every blade of the impeller runs in high efficiency curve section
even under full load operation. All components shall be subject to
durability test to ensure high durability. The gear drive and air
compression parts are completely separated to ensure 100% clean and
oil-free compressed air.
Value:
Energy-Saving
Designed with the most advanced aerodynamic theory and tools,
personalized design for the user's application requirements,to keep
the equipment working in an energy-efficient area to achieve energy
savings, which can save 30-60% energy.
Stable and Reliable
The use of aviation standards processing, manufacturing,
commissioning, inspection, far higher than the general mechanical
standards. The impeller uses aviation grade high strength alloy
material, can be used 300,000 hours (about 35 years) without
maintenance, the drive system using high-efficiency energy-saving
motor, stable and reliable quality, suitable for long-term stable
operation in a variety of industrial environments.
Save on investment costs, cost-effective
The core technologies and processes such as design, manufacturing
and assembly are all localized, and relying on the existing
research platforms of top-level Universities in China and aviation
military enterprises, the design and manufacturing costs are
greatly reduced. Compared with foreign advanced similar products,
the input cost is reduced by at least half under the same installed
power, and the equipment efficiency is not lower than or even
higher than foreign advanced products.
Advantages of GooDSeaA centrifugal compressor
| Item | Features of GooDSeaA | Other Vendors |
| Integrated unit design | Simple overall layout, compact structure, reasonable and simple
installation, only the air pipe, water pipe and electrical system
need to be connected. Bring benefits to customers, small amount of
investment, save a lot of installation time and costs | Fix the unit with four corner gasket (no shock absorption function
and potential safety hazard exists) |
| The main structure adopts horizontal split type | The gearbox, bearing and sealing system are all of horizontal split
structure, which is convenient for maintenance. During maintenance,
it is not necessary to dismantle all the air inlet and exhaust
pipes, volute, etc. Compared with vertical sectioning, it can save
more than 6 times of maintenance time. | Some companies adopt vertical segmentation structure |
| Inlet regulating guide vane | Equipped with imported regulating guide vane, it can save 9% energy
upon the maximum inlet flow than butterfly valve. Wide adjustment
range. Save a lot of operating costs. | Butterfly valve, low cost, but high energy consumption |
| Efficient backward curved impeller and integral milling diffuser | Efficient three-way flow backward curved impeller designed by
aviation university team is adopted to make the compressor reach
60-105% of flow regulation range. The diffuser made of aviation
aluminum material ensures no leakage and minimal internal friction.
Compared with cast iron and cast aluminum, it has corrosion
resistance, high strength and small air resistance. The efficiency
of the compressor is further improved. Save a lot of operating
costs | Some companies adopt casting diffuser |
| Tilting bearing | With the advanced five piece tilting pad bearing, it can
automatically adjust to achieve the best stable operation state,
excellent buffer performance, good anti oil film oscillation
performance, and can automatically adjust the service life of more
than 100000 hours. The design service life of the unit shall not be
less than 30 years. | |
| Cooling system | GooDSeaA cooler structure adopts water flowing inside the pipe and
gas flowing outside the pipe , with guide rail and roller. The
drawable straight tube cooler is made of Navy copper, which has
excellent corrosion resistance and is not easy to scale. | Some companies use stainless steel. Poor heat conduction
efficiency, low cost, easy to oxidize and scale. It is not suitable
for cleaning and maintenance. |
| Oil circuit system | Free switching parallel double oil filter effectively avoids the
disadvantage that the single oil filter must be shut down to
replace the filter element and extends its service life. | Single oil filter is used in some companies, so it is impossible to
change the filter element without stopping the machine under
emergency |
|
| Carbon ring sealing system without oil | Two relatively independent working systems, air circuit and oil
circuit, ensure the air quality of compressor, and overcome the
leakage problem of compressor through reliable labyrinth seal or
carbon ring seal system. | |
| Simple Control System | Standard PLC + color LCD touch screen, with large storage function,
multiple monitoring and protection functions, can display multiple
information at the same time in the same picture, which is easier
to operate and more stable. | Some companies use microcomputer controller, LED display single
page scrolling display screen, display content is too less,
operation is troublesome. |
| Anti surge function | The system consists of surge pressure sensor and motor current
sensor. When the change ratio of the last stage exhaust pressure
and the change ratio of the motor current is higher than the set
value of surge, PLC will regard this situation as surge, and then
alarming system will work and compressor will stop meanwhile
discharging the air. Through the advanced method of continuously
monitoring the changes of the two parameters of system pressure and
current at the same time, it can avoid the misoperation of surge
only by single signal judgment, and effectively prevent the
occurrence of surge | |
| Vibration protection function | Goodsea centrifugal compressor is equipped with vibration
measurement system in each stage of compression section, which has
protection measures for each stage. And the equipment has the
functions of numerical display, alarm, shutdown, etc. Ensure safe
and stable operation of the whole set machine. | In order to reduce the cost, only one vibration measuring point is
arranged on each shaft. The monitoring cannot be guaranteed and the
accuracy is not high. |
Parameters of High Pressure Process Compressor Turbine System with
Wide Flow Range
| MODEL | POWER
KW | PERSSURE
bar | AIR FLOW
m3/min | DIMENSION
L*W*H mm | WEIGHT
KG |
| GDC-30 | 130-270 | 2.5-10 | 25-50 | 2750x1460x2000 | 4200 |
| GDC-60 | 260-450 | 2.5-10 | 48-85 | 2850x1560x2000 | 4500 |
| GDC-90 | 430-800 | 2.5-10 | 78-140 | 2950x1660x2100 | 4900 |
| GDC-120 | 710-1050 | 2.5-10 | 132-200 | 3000x1660x2120 | 8100 |
| GDC-150 | 980-1500 | 2.5-10 | 180-270 | 4800x2200x2600 | 12000 |
| GDC-250 | 1500-1900 | 2.5-10 | 270-360 | 5300x2600x3000 | 18000 |
| GDC-400 | 1960-2900 | 2.5-10 | 360-530 | 5800x3000x3200 | 28000 |
| GDC-650 | 2600-4900 | 2.5-10 | 470-890 | 6200x3500x3800 | 48000 |
| GDC-1200 | 4500-9100 | 2.5-10 | 830-1500 | 7200x5000x4800 | 53000 |
FAQ
Q: Are you a factory or trading company?
A: We are the professional air compressor/vacuum pump/ blower
manufacturer.
Q: Where does your company and factory locate in? How can I visit
you?
A: Our company locates in No.666, Xinbo Road, Maogang Town,
Songjiang District, Shanghai City 201606, China. It takes about one
hour from Shanghai Pudong airport or Hongqiao Airport to our
company.
Q: What does your company do regarding quality control?
A: Quality always enjoys the top priority. GoodSeaA attaches great
importance to quality control from beginning to the end.
Q: What is your after-sale service?
A: The guarantee period is 12 months from the date of the machine
installation or 15 months from the day of machine delivery. We will
take full responsibilities for the charges caused by the defects
during the guarantee period(This warranty does not cover human
damage or misuse of product).
Q: Do you offer consumables and wearing parts, too?
A: We supply all the necessary spare parts and wearing parts for
all equipments and on time.
Q: Which countries have you exported your products to?
A: Our group has been exporting our products to over sixty
countries, like Canada, the United States, Russia, Portugal,
Poland, Hungary, Turkey, South Africa, India, Singapore, the united
Arab Emirates, Egypt, Indonesia, Pakistan, Vietnam, Brazil, Peru,
Chile, Argentina etc.
Product Photos
